Part# 06-002
MEETS SFI 10.1E CHASSIS SPEC KIT COMES WITH ALL TUBING CUT, NOTCHED AND BENT, (1 )5/16 6061-T6 ALUMINUM MID-MOTOR PLATE, (2) UPPER MOTOR MOUNTS, (2) LOWER MOTOR MOUNTS (4) REAR MOUNT CHASSIS BRACKETS, (8) REINFORCEMENT PLATES (2) REAR MOUNT HOUSING BRACKETS, (1) BLUEPRINT 20″ SHOULDER HOOP (inside)
NOTE: This is an Oversize Truck Freight Item
$4,141.56
Funny Car Chassis Kit for Top Alcohol Funny Car and Nostalgia Funny Car – TA/FC & N/FC. Meets SFI 10.1E Chassis Specification w/tubing & prints. Note: 20″ wide shoulder hoop
NOTE: Shipping charges, for this Oversize Truck Freight item, will be calculated by an S&W Performance Group representative and will be charged separately. You will also receive an email, direct from S&W, which includes the Oversize Truck Freight total.
| Weight | .5 lbs |
|---|---|
| Dimensions | 0.1 × 0.1 × 0.1 in |
I'm not sure, you should contact our engineer John (800)523-3353 extension 137 to answer that
It has a 21" wide hoop. Any wider, is could start interfering with the tires
Part# 06-001
DESIGNED TO MEET SFI CHASSIS SPEC 10.2
6.00 – 7.49 SECOND ET
ALL CHROME MOLY TUBING PRE-CUT AND BENT
MOTOR PLATE BLANK, MOTOR MOUNTS,
4-LINK FRAME BRACKETS
FAB HOUSING INCLUDED, FILL & DRAIN, OLDS ENDS
NO SUSPENSION BRACKETS WELDED ON
CHROME MOLY 4-LINK TUBES & ROD ENDS
INCLUDES INTERIOR REINFORCING TUBES FOR ADVANCED ET
NOTE: This is an Oversize Truck Freight Item
Part# 05-003-S-AET
ADVANCED ET, MEETS SFI SPEC 2.5 CERT 6.00 – 7.49, INCLUDES; STRANGE ALUMINUM REAR HOUSING with MOUNTING BRACKETS,, SPINDLE BOSSES, 1/4″ ALUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET, CHROME MOLY TUBING; CUT, BENT NOTCHED, 21″ WIDE SHOULDER HOOP
NOTE: This is an Oversize Truck Freight Item
Part# 06-125
DESIGNED TO MEET SFI CHASSIS SPEC 10.2
6.00 – 7.49 SECOND ET
ALL TUBING IS CHROME MOLY, TUBES ARE NOTCHED, TIG WELD REQ’D
INCLUDES 9″ FORD SMALL WEB REAR HOUSING w/BACK BRACE
MID MOTOR PL w/CHEVY BOLT PATTERN, FRONT MTR MNT BLANKS
JIG WELDED FRONT AXLE, BLUE PRINTS & BILL OF MATERIALS
INCLUDES INTERIOR REINFORCING TUBES FOR ADVANCED ET
NOTE: This is an Oversize Truck Freight Item
Part# 05-004
200″ wheelbase, front engine dragster chassis kit. Perfect for nostalgia dragster racing. Meets SFI spec 2.4C 6.00 – 7.49. Kit includes all chrome moly tubing, cut, bent and notched (where possible). Jig welded front axle, 1/4″ Aluminum mid motor plate blank. Aluminum front motor plate blanks. 9″ Ford rear with Olds ends. Rear housing mounts. Anti-rotation device. Blue print. NOTE – this is a chrome moly kit and must be TIG welded.
NOTE: This is an Oversize Truck Freight Item
