Weight | 0.5 lbs |
---|---|
Dimensions | 5 × 4 × 3 in |
King Pin Bushing Removal & Installation Tool
Part# 35-099
SW’s new king pin bushing removal and installation tool makes changing these bushings a snap! Kit works with all SPE, PS, Angila type spindles. Kit includes bushing tool and drive pin. A 11/16″ hand reamer is required to complete the job and this kit can be purchased with the reamer (search part # 35-099R) King pins and bushing sold separately.
$26.79
Product Q&A Ask a Question
Question Added Successfully
-
Will this tool remove king out of a 1934 Chevy pickup truck
Do not think so. The kit is made for king pins about 11/16" in diameter
Question by : David on Oct 9, 2020 03:30:07 PM -
Have a rear engine 2001 Undercover Dragster and want to replace loose king pins and bushings. Want removal tool and honing tools and not exactly sure on parts. One bushing has a lip and one does not. I’m not sure what I have so I was looking for some direction. Thank you
You will need to take it apart and look at the bushing configuration, and king pin. The bushings vary depending on when the chassis manufacture bought the spindle kit. Usually the king pins will not need replacing.
Question by : Dan Shepherd on Feb 20, 2021 01:19:32 PM
Related products
-
Tools, Brackets & Tabs & Bottle Clamps, Housing Tools, S&W Made Parts, Hardware & Tools
4-Link Bracket Spacer Kit – 1/2″ Hole
Tools, Brackets & Tabs & Bottle Clamps, Housing Tools, S&W Made Parts, Hardware & Tools4-Link Bracket Spacer Kit – 1/2″ Hole
Part # 90-027
Spacer has 1/2″ hole and is 1.20″ wide used to align space 4-Link chassis brackets can also be used for 4-Link rear hsg. brackets includes (2)zinc plated spacers,bolt nuts spacer has “GRAB TAB” welded on for easy install removal.
SKU: 90-027$26.90 -
Tools, S&W Made Parts
King Pin Bushing Removal & Installation Tool With Reamer
Part# 35-099R
SW’s new king pin bushing removal and installation tool makes changing these bushings a snap! Kit works with all SPE, PS, Angila type spindles. Kit includes bushing tool, drive pin and a 11/16″ hand reamer which is required to properly resize the bushings after installation. For those of you who already have the correct reamer, this kit can be purchased without the reamer King pins and bushing sold separately.
SKU: 35-099R$91.80 -
Tools, Brackets & Tabs & Bottle Clamps, Housing Tools, S&W Made Parts, Hardware & Tools
4-Link & Ladder Bar Bracket Spacer Jig Kit 5/8″ Hole
Tools, Brackets & Tabs & Bottle Clamps, Housing Tools, S&W Made Parts, Hardware & Tools4-Link & Ladder Bar Bracket Spacer Jig Kit 5/8″ Hole
Part #95-022
Used to align space 4-Link ladder bar chassis brackets can also be used for 4-Link rear housing brackets includes (2)zinc plated spacers , Bolts nuts spacer has 5/8″ hole and is 1.20 thick spacer has “GRAB TAB”welded on for easy install removal
SKU: 90-022$26.79