FK Bearings rod ends and adjusters
28″ Double Adjustable Ladder Bars With Chromoly Rod Ends
Part# 40-131
28″ From center line of rear axle tube to center of front rod end. ,1″ x .156″ wall DOM tubing, 3/4 shank 5/8″ bore solid rod ends on back, 3/4-16 chromoly spherical rods, 3/4 shank with 5/8 hole in front. Hex adjuster in bottom tube , (4) 1/4″ mild steel housing brackets for 3″ axle tubes
$316.85
Weight | 30 lbs |
---|---|
Dimensions | 39 × 9 × 5 in |
Product Q&A Ask a Question
Question Added Successfully
-
This product has no questions.
Related products
-
S&W Made Parts, Drag Race Ladder Bars
32″ “Ultimate” Ladder Bar
Part# 40-133
32″ From center line of rear axle tube to center of front rod end. 1-1/4″ x .095″ wall chromoly tubing, 3/4 shank 5/8″ bore solid rod ends on back, chromoly 3/4″ shank with 5/8″ hole in front. Chromoly hex adjuster in bottom tube , (4) 1/4″ Domex housing brackets for 3″ axle tubes
SKU: 40-133$585.05 -
S&W Made Parts, Drag Race Ladder Bars
Custom Ladder Bar
Part# 40-1080
Ladder Bar – Special Order Length, one ladder bar to customer specified length, no hardware or brackets, welded bar with no finish coating, 1″x 0.156 wall DOM tubing tapped 3/4-16. NOTE: picture shown with optional brackets, rod ends and hardware.
SKU: 40-1080$179.05 -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear,
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear,
Part# 05-001W-S-AET
225″ WHEEL BASE, 23″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001W-S-AET$3,540.35 -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Part# 05-001-AET-BP
Assembly blueprint with cut list for 225″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5B for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-AET-BP$117.65