FK Bearings rod ends and adjusters
32″ Double Adjustable Ladder Bars With Standard Rod Ends
Part# 40-104
32″ From center line of rear axle tube to center of front rod end. ,1″ x .156″ wall DOM tubing, 3/4 shank 5/8″ bore solid rod ends on back, 3/4-16 standard spherical rods, 3/4 shank with 5/8 hole in front. Hex adjuster in bottom tube , (4) 1/4″ mild steel housing brackets for 3″ axle tubes
$316.85
Weight | 34 lbs |
---|---|
Dimensions | 37 × 8 × 2 in |
Product Q&A Ask a Question
Question Added Successfully
-
This product has no questions.
Related products
-
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Part# 05-002-AET
21″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print. NHRA 2.5 chassis cert 6.00 – 7.49
SKU: 05-002-AET$5,907.35 -
S&W Made Parts, Drag Race Ladder Bars
28″ Double Adjustable Ladder Bars With Standard Rod Ends
Part# 40-130
The new SW 28 Sport Compact / Import ladder bars are perfect for lightweight, short wheelbase sport compact and import applications Each bar is jig constructed from 1″x.156″ wall mild steel tubing that is internally threaded. Each bar is attached to the rear housing between two 1/4″ steel brackets that provide 200 degrees of welding surface. Two standard spherical rod ends ( 3/4″ thread with a 5/8″ hole in either, standard or chrome-moly , four(4) solid rod ends,safety brackets, rear housing brackets and hardware are included. All ladder bars feature a black powder coat finish for added protection and an improved appearance.”
SKU: 40-130$280.85 -
Hardware & Tools, S&W Made Parts, Drag Race Ladder Bars, Truck & RV Ladder Bars
3 1/4″ Rear Axle Housing Floater Kit- Slider Type
Hardware & Tools, S&W Made Parts, Drag Race Ladder Bars, Truck & RV Ladder Bars3 1/4″ Rear Axle Housing Floater Kit- Slider Type
Part# 40-271
A must for any leaf spring car or truck utilizing a ladder bar . SW floater kits are designed to eliminate suspension bind and maximize weight transfer. Units fit Ford, GM, Dana and 8-3/4 Mopar with 3 1/4 ” tubes. All hardware included. 40-230 instructions (1 of 2) 40-230 instructions (2 of 2)
SKU: 40-271$234.25 -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Dragster with Solid Mount Rear
Part# 05-001-BP
Assembly blueprint with cut list for 225″ wheelbase dragster with solid mount rear. Meets SFI spec for rear engine dragster 6.00 seconds and slower. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-BP$117.65