|Dimensions||55 × 6 × 3 in|
Manual Rack And Pinion Conversion Kit 64 – 67 GM A-Body
1964 – 1967 GM A-BODY, CHEVELLE, CUTLASS, SKYLARK, GTO KIT INCLUDES BUMP STEER KIT RACK CLAMP AND RACK MOUNT PLATE 3 CHROME MOLY U JOINTS STEERING SHAFT AND SHAFT BRACE BILLET ALUM STEERING ARMS CUSTOM NARROWED PINTO STYLE MANUAL RACK WELD IN RACK!!!!
Pinto Rack and Pinion, 5″ Narrower Than Stock
Pinto rack and pinion, 5″ narrower than stock, 3.75 lock to lock, over-all length 40.5″, housing length 13.5, Flaming River # FR1501-2SKU: 35-048
71-72 Pinto Rack & Pinion Flaming River Rack
Direct repacement 71-72 Pinto, 45-1/2 overall width, 1/2X x 20 threaded ends
Flaming River # FR1501
uses 35-378F or 35-409 u-joint, 36-006 rack mount.SKU: 35-042
74-78 Mustang II Manual Rack/Pinion 3″ Narrower Than Stock
Flaming River 74-78 Mustang II manual rack pinion 3″ narrower than stock , 13″ Center to center on rack mounts 4.15 turns lock to lock rack travel 5.25″Pivot= 21.5 center to center Flaming River Rack #1502-3×3 manual rack overall length is 42″ , used in 36-400-3 packageSKU: 35-037-3
Racks, S&W Made Parts, K-Member, Front Suspension & Rear Suspension Packages
67-69 Camaro & 68-74 Nova Rack & Pinion Mounting KitRacks, S&W Made Parts, K-Member, Front Suspension & Rear Suspension Packages
67-69 Camaro & 68-74 Nova Rack & Pinion Mounting Kit
Converts stock rear steer to rack & pinion front steer. removal of stock lower control arm crossmember required. Replacement removable tubular crossmember under engine included. Also includes rack pinion mounting bracket, billet aluminum pinto rack mount clamp, tie rods, diagonal brace gussets and crossmember cap off plates with integral tie down loops and hardware. Cutting, fitting welding required.
Note” pinto rack 35-042 and 35-078 aluminum steering arms not includedSKU: 35-371