| Weight | 42 lbs |
|---|---|
| Dimensions | 73 × 12 × 5 in |
Universal Fit Frame Rails, S&W Made Parts
ROUND TUBE FRAME RAILS 1 5/8″ DIAMETER X .134 WALL EWS TO CUSTOMER SPEC
Part# 10-037
Pair of 1 5/8″diameter X .134″ Mild steel EWS frame rails sketch or template- from customer required bends radius will be 6″ on center of tube minimum of 6″straight between bends special shippping required for rail over 9 Ft long – CLICK HERE for Custom Frame Rail Order Form
$293.55
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
This product has no questions.
Related products
-
S&W Made Parts, Chassis & Blueprints, Dragster, Altered, & Funny Car
23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
S&W Made Parts, Chassis & Blueprints, Dragster, Altered, & Funny Car23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Part# 05-001W-AET
ADVANCED ET DRAGSTER KIT – SOLID MOUNT REAR, 23″ WIDE, 225″ WHEEL BASE, 23″ SHOULDER HOOPALL TUBING IS CHROME MOLY, NOTCHED BENT, INCLUDES 9″ FORD REAR HOUSING with OLDS ENDS MOUNTING PLATES, A-ARM FRONT END with KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001W-AET -
Universal Fit Frame Rails, S&W Made Parts
CUSTOM FRAME RAILS
Part# 10-030
(1) pair of 2″X3″X.083″ mild steel frame rails bent to customer spec sketch or template from customer required bends will be 6″ radius on center of 3″ side .Minimum 6″ of straight between bends NOTE: Rails are bent by crimping rather than stretching the material wall . See picture, CLICK HERE for Custom Frame Rail Order Form
SKU: 10-030 -
S&W Made Parts, Chassis & Blueprints, Blueprints
Blueprint – 230″ Advanced ET Dragster With Swing Arm Rear Suspension
S&W Made Parts, Chassis & Blueprints, BlueprintsBlueprint – 230″ Advanced ET Dragster With Swing Arm Rear Suspension
Part# 05-002-AET-BP
Assembly blueprint with cut list for 230″ wheelbase ADVANCED ET dragster with swing arm rear suspension. Meets SFI spec 2.5 for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-002-AET-BP -
S&W Made Parts, Chassis & Blueprints, Blueprints
Blueprint – 245″ Advanced ET Dragster With Solid Mount Rear
S&W Made Parts, Chassis & Blueprints, BlueprintsBlueprint – 245″ Advanced ET Dragster With Solid Mount Rear
Part# 05-003-AET-BP
Assembly blueprint with cut list for 245″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5 for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-003-AET-BP
