| Weight | 4 lbs |
|---|---|
| Dimensions | 18 × 4 × 4 in |
S&W Made Parts, Seats & Seat Mounts
Seat Mounting Kit For Stock Floors
Part# 95-383
(2) left, (2) right 1/8″ Aluminum brackets 2″ x 2″ x 14″, with hardware
$33.85
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
WILL THESE FIT A 68 CAMARO WITH POLY SETS THNAKS STEVE
These seat mount are universal. They are not specific to a seat type or vehicle. They will work with the poly seat
Question by : STEVE on Feb 4, 2020 02:34:24 PM
Related products
-
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Part# 05-002-AET
21″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print. NHRA 2.5 chassis cert 6.00 – 7.49
SKU: 05-002-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
245″ Dragster Kit – Solid Mount Strange Rear, 23″ wide
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts245″ Dragster Kit – Solid Mount Strange Rear, 23″ wide
Part# 05-003W-S-AET
ADVANCED ET, MEETS SFI SPEC 2.5 6.00 – 7.49 , INCLUDES; STRANGE ALUMINUM REAR HOUSING with MOUNTING BRACKETS,, SPINDLE BOSSES, 1/4″ ALUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI ROTATION MOUNTING BRACKETS BLUE PRINT SET, CHROME MOLY TUBING; CUT, BENT NOTCHED, 21″ WIDE SHOULDER HOOP
SKU: 05-003W-S-AET -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Part# 05-001-AET-BP
Assembly blueprint with cut list for 225″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5B for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-AET-BP
