Kit will work for 1 3/4″ and 1 5/8″ tubing.
NHRA/IHRA legal to 8.50 in 1/4 mile.
S&W Made Parts, Swing Out Sidebar Kits
Swing Out Side Bar Kit- Pair
Part #13-357P
Kit will do both sides of roll bar or roll cage. Kit only includes the hardware to convert exsisting door bar. Does not include tubing. NHRA/IHRA legal to 8.50 in 1/4 mile.
Replacement Quick Pin Part # 66-021
$123.09
| Weight | 4 lbs |
|---|---|
| Dimensions | 6 × 4 × 3 in |
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
Do you sell a ten point roll case for 1971 Plymouth Duster that goes around the dash
We do not offer an around dash style for this kit. We can make one, but you will need to give us the dimensions.
Question by : dennisduster on Jan 30, 2020 07:55:59 AM -
I have a 2” roll cage need a swing out door bar kits for it , do you make one or can you make actually two of them? Thanks
The kit is made for 1-5/8 and 1-3/4 tubing. Not sure how it will work on a 2" tube
Question by : Kirk on May 20, 2020 05:30:53 PM
You may also like…
Related products
-
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Part# 05-001-AET-BP
Assembly blueprint with cut list for 225″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5B for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-AET-BP -
Steering & Pedals, S&W Made Parts
Wide Front Axle For Front Engine Dragster Kit 05-004
Part# 05-004FAW
42″ center to center king pin centers, 23 degree caster 48-1/4″ center-center tires, ( 2) 3/8″ diameter mounting bushings on 2″ centers, 24″ between bends, mounting bushings and king pins welded in. Can be used with 35-013 torsion bar. Radius rod kit 05-146 is required
SKU: 05-004FAW -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Dragster with Solid Mount Rear
Part# 05-001-BP
Assembly blueprint with cut list for 225″ wheelbase dragster with solid mount rear. Meets SFI spec for rear engine dragster 6.00 seconds and slower. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-BP -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
245″ Dragster Kit – Solid Mount Strange Rear, 21″ Wide
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts245″ Dragster Kit – Solid Mount Strange Rear, 21″ Wide
Part# 05-003-S-AET
ADVANCED ET, MEETS SFI SPEC 2.5 CERT 6.00 – 7.49, INCLUDES; STRANGE ALUMINUM REAR HOUSING with MOUNTING BRACKETS,, SPINDLE BOSSES, 1/4″ ALUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI-ROTATION MOUNTING BRACKETS BLUE PRINT SET, CHROME MOLY TUBING; CUT, BENT NOTCHED, 21″ WIDE SHOULDER HOOP
SKU: 05-003-S-AET
