| Weight | 200 lbs |
|---|
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
Top Fuel Front Engine Dragster kit No Rear Housing – 225″ Wheel Base
Part# 05-096
MEETS SFI CHASSIS SPEC 2.2, 5.99 SECONDS AND QUICKER, 23″ SHOULDER HOOP (INSIDE) DOUBLE FRAME RAIL A-ARM FRONT END DESIGN, INCLUDES; CHROME MOLY TUBING CUT, BENT NOTCHED, 1/4″ ALUMINUM MID PLATE,FRONT MOTOR MOUNT BLANKS, ANTI ROTATION DEVICE, 6 POINT ROLL CAGE (NOT NOTCHED)!! DOES NOT INCLUDE REAR HOUSING !!
$2,927.65
Product Q&A Ask a Question
Success!
Question Added Successfully
Sort by
-
This product has no questions.
Related products
-
Chassis Kits, Dragster, Altered, & Funny Car, S&W Made Parts
125″ 4-Link Altered Chassis Kit
Part# 06-001
ALL CHROME MOLY TUBING PRE-CUT AND BENT
MOTOR PLATE BLANK, MOTOR MOUNTS,
4-LINK FRAME BRACKETS
FAB HOUSING INCLUDED, FILL & DRAIN, OLDS ENDS
NO SUSPENSION BRACKETS WELDED ON
CHROME MOLY 4-LINK TUBES & ROD ENDS
INCLUDES INTERIOR REINFORCING TUBES FOR ADVANCED ETSKU: 06-001 -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Part# 05-001-AET-BP
Assembly blueprint with cut list for 225″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5B for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-AET-BP -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
 Part# 05-002W-AET
23″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print,
SKU: 05-002W-AET -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts21″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount Strange Rear
Part# 05-001S-AET
225″ WHEEL BASE, 21″ SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED AND BENT, INCLUDED STRANGE ALUMINUM REAR MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
SKU: 05-001S-AET
