Torque Arm Mounting Bracket 9″ Ford
Part# 40-618
Torque arm bracket for use with SW bolt in 9″ Ford rear housing. Required when installing rear in cars already equipped with an SW torque arm.
$234.25
Product Q&A Ask a Question
Question Added Successfully
-
This product has no questions.
Related products
-
S&W Made Parts, Adjustable Torque Arms
82-02 Camaro / Firebird Chromoly Adjustable Torque Arm -9″ Ford Housing
S&W Made Parts, Adjustable Torque Arms82-02 Camaro / Firebird Chromoly Adjustable Torque Arm -9″ Ford Housing
Part# 40-617CM
Includes; chromoly 40-601CM torque arm , 40-618 rear torque arm mounting bracket, front mounting link, top & bottom mounting lugs for 9″ Ford housing, lateral link, mounting bracket and hardware. Black powder coated Customer required to weld lugs to rear housing (use 40-617-JIG). Requires S&W Race Cars frame connectors or after market crossmember
40-618 instructions 40-601-2 instructions 40-601-1 instructions
SKU: 40-617CM -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 225″ Advanced ET Dragster with Soild Mount Rear
Part# 05-001-AET-BP
Assembly blueprint with cut list for 225″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5B for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-001-AET-BP -
Bolt-in Rear Housings
Strange 12 Bolt 1982-2002 F Body Complete Rear End
Part# 45-PRG200
STRANGE 12 BOLT 1982-1992 F BODY COMPLETE REAR END, WITH TORQUE ARM PROVISION, 3.150″ HOUSING ENDS, 33 SPLINE S/S AXLES, 1/2″ OR M15 X 1.5 STUDS, POSI UNIT, CROSSOVER U-JOINT, U-BOLTS, CHROME COVER,STRANGE STANDARD. GEAR SET (SPECIFY)
SKU: 45-PRG200 -
S&W Made Parts, Stock Replacement/Bolt In, Bolt-in Rear Housings
Bolt In 9″ Ford Housing for 82-92 Camaro Stock Width
S&W Made Parts, Stock Replacement/Bolt In, Bolt-in Rear HousingsBolt In 9″ Ford Housing for 82-92 Camaro Stock Width
Part# 45-450
Same width as stock, 56-1/4″ housing end to housing end, 61-3/4″ axle face to axle face, (1/2″ pinion off-set), uses GM housing ends with 3.15 bearing. Uses after market brakes. Brackets are in stock locations, lower control arm brackets have additional mounting holes. Adjustable weight jacker spring pad. Works with 40-619 or 40-619CM torque arm and 40-600 or 40-600CM frame connectors
SKU: 45-450
