Funny Car Chassis Kit TA/FC, N/FC
Part# 06-002
MEETS SFI 10.1E CHASSIS SPEC KIT COMES WITH ALL TUBING CUT, NOTCHED AND BENT, (1 )5/16 6061-T6 ALUMINUM MID-MOTOR PLATE, (2) UPPER MOTOR MOUNTS, (2) LOWER MOTOR MOUNTS (4) REAR MOUNT CHASSIS BRACKETS, (8) REINFORCEMENT PLATES (2) REAR MOUNT HOUSING BRACKETS, (1) BLUEPRINT 20″ SHOULDER HOOP (inside)
$3,765.05
Product Q&A Ask a Question
Question Added Successfully
-
Is the upper frame rail 1 1/2 to the front of the motor plate or is all the to the spindle area.
I'm not sure, you should contact our engineer John (800)523-3353 extension 137 to answer that
Question by : Kirk on May 20, 2020 05:00:46 PM
Related products
-
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
Top Fuel Front Engine Dragster Kit 225″ Wheel Base With Fabricated Rear Housing –
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made PartsTop Fuel Front Engine Dragster Kit 225″ Wheel Base With Fabricated Rear Housing –
Part# 05-096FR
MEETS SFI CHASSIS SPEC 2.2, 5.99 SEC AND QUICKER23″ SHOULDER HOOP (INSIDE) DOUBLE fRAME RAIL A-ARM FRONT END DESIGN, INCLUDES; CHROME MOLY TUBING CUT, BENT NOTCHED, 1/4″ ALUMIUM MID PLATE,FRONT MOTOR MOUNT BLANKS, ANTI ROTATION DEVICE, 6-POINT ROLL CAGE (NOT NOTCHED), 9″ FORD FAB REAR with FLOATERS
SKU: 05-096FR$6,728.85 -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
245″ Dragster Kit – Solid Mount Strange Rear, 23″ wide
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts245″ Dragster Kit – Solid Mount Strange Rear, 23″ wide
Part# 05-003W-S-AET
ADVANCED ET, MEETS SFI SPEC 2.5 6.00 – 7.49 , INCLUDES; STRANGE ALUMINUM REAR HOUSING with MOUNTING BRACKETS,, SPINDLE BOSSES, 1/4″ ALUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTI ROTATION MOUNTING BRACKETS BLUE PRINT SET, CHROME MOLY TUBING; CUT, BENT NOTCHED, 21″ WIDE SHOULDER HOOP
SKU: 05-003W-S-AET$4,037.45 -
Chassis Kits, Blueprints, S&W Made Parts
125″ Altered With 4-Link Rear Suspension Blueprints
Part# 06-001-BP
Assembly blueprint with cut list for 125″ wheelbase altered with 4-link rear suspension. Meets SFI spec 10.3 for altereds 7.50 seconds and slower. NOTE – assembling a drag race vehicle from a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 06-001-BP$117.65 -
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts
230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
Chassis & Blueprints, Dragster, Altered, & Funny Car, S&W Made Parts230″ Wheelbase Swing Arm Dragster Chassis Kit – 23″ Shoulder Hoop
Part# 05-002W-AET
23″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print,
SKU: 05-002W-AET$5,907.35