0.090 aluminum handle bolts to window button on inside. customer required to drill and counter sink button. tubing loop get welded to roof hoop
Weight | .001 lbs |
---|---|
Dimensions | .2 × 2 × .2 in |
Product Q&A Ask a Question
Question Added Successfully
-
This product has no questions.
Related products
-
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts23″ Wide, 225″ Wheelbase Dragster Chassis Kit- Solid Mount 9″ Ford Rear
Part# 05-001W-AET
ADVANCED ET DRAGSTER KIT – SOLID MOUNT REAR, 23″ WIDE, 225″ WHEEL BASE, 23″ SHOULDER HOOPALL TUBING IS CHROME MOLY, NOTCHED BENT, INCLUDES 9″ FORD REAR HOUSING with OLDS ENDS MOUNTING PLATES, A-ARM FRONT END with KING PIN BOSSES, FULL MID MOTOR PLATE FRONT MOTOR PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.00 – 7.49 SECONDS
NOTE: This is an Oversize Truck Freight Item
SKU: 05-001W-AET$3,047.45 -
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts
230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Chassis & Blueprints, Dragster, Altered, & Funny Car Chassis Kits, S&W Made Parts230″ Wheelbase Swing Arm Dragster Chassis Kit – 21″ Shoulder Hoop
Part# 05-002-AET
21″ shoulder hoop. All chrome-moly cut, bent notched, A-arm components, A-arm mounting brackets, Strange alum. rear housing, Rear housing mounts, Water jet cut Chevy mid plate, Water jet cut Chevy front motor plate blanks, Motor plate mounting brackets, Welded swing arm, upper tubes and 8 chrome moly rod ends, Anti roll bar, housing links, Adj. lower shock mounts, 4-Link dragster blue print. NHRA 2.5 chassis cert 6.00 – 7.49
NOTE: This is an Oversize Truck Freight Item
SKU: 05-002-AET$5,907.35 -
Chassis & Blueprints, Blueprints, S&W Made Parts
Blueprint – 245″ Advanced ET Dragster With Solid Mount Rear
Chassis & Blueprints, Blueprints, S&W Made PartsBlueprint – 245″ Advanced ET Dragster With Solid Mount Rear
Part# 05-003-AET-BP
Assembly blueprint with cut list for 245″ wheelbase ADVANCED ET dragster with solid mount rear. Meets SFI spec 2.5 for rear engine dragster 6.00 to 7.49 seconds .. NOTE – assembling a drag race vehicle form a blue print is not for beginners and should only be attempted by a skilled and experienced fabricator
SKU: 05-003-AET-BP$225.00 -
Body, S&W Made Parts, Window
S10 Rear Window Kit S10 1994 – 2002 Tinted Lexan
Part# 95-610T
S10 1994 – 2002 Lexan rear window kit, tinted (see though) 1/8″ thick, window cut to fit, includes (2) aluminum back bar seal plates and hardware. The window is (56″ widest point, 16″ tallest point) and shouldn’t require much trimming.
SKU: 95-610T$171.11