Call Now to Save! 1-800-523-3353

Motor Mounts


1/4" 6061-T6 ALUMFITS S & W DRAGSTER WITH FRAME RAILS ON 20 7/8" CENTERSUSES WATER PUMP HOLES & 7/16 BOLT HOLE AT BOTTOM OF BLOCKNOTCHED TO FIT 1 3/8" DIAMETER SADDLE
Our Price: $152.95
Ask a Question
1/4" 6061-T6 ALUM FITS S&W DRAGSTERS WITH FRAME RAILS ON 20 7/8" CENTERS USES WATER PUMP HOLES & HOLES AT BOTTOM OF BLOCK NOTCHED TO FIT 1 3/8" DIAMETER SADDLE CUSTOMER REQUIRED TO DRILL HOLES FOR SADDLE MOUNTS
Our Price: $152.95
Ask a Question
1/4" 6061-T6 ALUMFITS S&W DRAGSTERS WITH FRAME RAILS ON 21 1/2" CENTERSUSES WATER PUMP HOLES & 7/16 HOLES AT BOTTOM OF BLOCKNOTCHED TO FIT 1 3/8" DIAMETER SADDLE (picture shown is 05-043F standard width)
Our Price: $152.95
Ask a Question
DRAGSTER FRONT MOTOR MOUNT SADDLE (PAIR), 1 3/8 X 065 CHROME MOLY X 3" LONG with 60-308 WELDED ON, USE ON 1-1/4" DIAMETER FRAME RAIL
Our Price: $44.95
Ask a Question
BARE (NO TABS) FRAME RAIL SADDLE (PAIR) - FOR 1 1/4" RAIL, 1 3/8"  X 0.065  CHROME MOLY X 3" LONG. NOTE: 05-076 WELDED SADDLES SHOW IN PICTURE
Our Price: $14.95
Ask a Question
BARE (NO TABS) FRAME RAIL SADDLE (PAIR) - FOR 1-3/8" RAIL, 1-1/2" X 0.065 X 3"LONG CHROME MOLY. NOTE: 05-076  WELDED SADDLES SHOW IN PICTURE
Our Price: $14.95
Ask a Question
MOTOR PLATE BLANK 6061 2' X 2'X 1/4"NO HOLES IN PLATE
Our Price: $92.95
Ask a Question
MOTOR PLATE BLANK 6061 ALUMINUM  2' X 2' X 3/8"NO HOLES
Our Price: $123.95
Ask a Question
MOTOR PLATE BLANK 6061 ALUMINUM 2' X 2' X 5/16"NO HOLES 
Our Price: $109.95
Ask a Question
5/16" 6061 ALUMINUM MOTOR PLATE DRILLED FOR KEITH BLACK BLOCK 2' X 2' X 5/16"
Our Price: $194.95
Ask a Question
1/4" 6061 ALUM PLATE 24" WIDE X 24" TALL 6" CRANK HOLE, 3" STARTER HOLE CENTER OF CRANK HOLE 10" UP FROM BOTTOM OF PLATE (FOR PLATE WITH 14-1/2" CRANK HOLE USE 20-108)
Our Price: $138.95
Ask a Question
MOTOR MID PLATE - CHEVY- 2' X 2' X 1/4 ' 6061 ALUMINUM WITHOUT STARTER HOLE NO STARTER HOLE, 6" CRANK HOLE, (2) COOLING HOLES
Our Price: $138.95
Ask a Question
MOTOR MID PLATE - KEITH BLACK HEMI - 2/ X 2' X 1/4" 6061 ALUMINUMPLATE HAS 6" CRANK HOLE & (2) 2" COOLING HOLESCRANK HOLE IS CENTERED ON PLATE, NO STARTER HOLE
Our Price: $138.95
Ask a Question
1/4" 6061-T6 ALUMINUM, PLATE NOT TO EXCEED 4 SQUARE FEETCUSTOMER MUST SEND IN ORIGINAL PLATE FOR DUPLICATION
Our Price: $287.95
Ask a Question
1/4" 6061 ALUMINUM PLATE 24" WIDE X 24" TALL 14-1/2" CRANK HOLE, 3" STARTER HOLE CENTER OF CRANK HOLE 10" UP FROM BTM OF PLATE (FOR PLATE WITH 6" CRANK HOLE USE 20-105)
Our Price: $138.95
Ask a Question
MOTOR MOUNT CLAMP, FITS 1-3/8" SADDLE ON 1-1/4" FRAME RAIL,
Our Price: $14.65
Ask a Question
MOTOR MOUNT CLAMP, FITS 1-1/2" SADDLE ON 1-3/8" FRAME RAIL
Our Price: $10.44
Ask a Question
3" STARTER HOLE, 6" CRANK HOLE
Our Price: $165.95
Ask a Question
STAINLESS STEEL T-BOLT CLAMP - 2-1/8" TO 2-7/16" RANGE
Our Price: $9.00
Ask a Question

Positive SSL on a transparent background