Strange Pro Touring Floater Kit Axles and Brakes Sold Separately

PRO TOURING FLOATER KIT: The Strange Pro Touring full floating kit design dramatically increases safety in comparison to a traditional flanged axle assembly. The floater spindle supports vehicle weight and resists cornering, braking, and accelerating loads, leaving the floater axle solely responsible for transmitting torque. A preload spacer between the tapered bearings bolsters maximum spindle nut torque eliminating bearing end play. Zero end play in the bearings eliminates piston knock-back encountered during hard cornering. Compact brake gap (3.50”) clears most suspension components located near original housing ends. The F5010 Pro Touring floater kit features 2” O.D. chrome moly spindles, 35 spline drive plates, multiple patterns for 4 1/2”, 4 3/4”, and 5” bolt circles, and 1/2” x 20 press-in wheel studs. The floater axles and brake kit are sold separately. The axles are 35 spline to mate to the drive plate, and the inboard splines are made to match your specific carrier. The option for 5/8” x 18 press-in wheel studs also includes stud sleeves, lug nuts and washers. There are also options to adapt 2010 and earlier, or 2011 and later Mustang ABS systems.